Balloon

• Dimension : 1075mm diameter & 600mm height
• Material : Rip-stop nylon with polyurethane coating
• Non flammable & UV-resistant envelope material
• Elliptical shape offers strong wind resistance of up to 100km per hour / 62.5 miles per hour
• Built in high heat resistance reflector for optimal light output
• Inflated by a blower with internal pressure of 3 mbar/ 300 pa
• Built in pressure sensor to withstand strong falls or impact
• Continuous circulating air maintains envelope inflated and keep the lamp cool
• Auto power cut off switch to prevent eye damage if internal pressure is reduced

Tilting Head Device

• Dimension : 100mm diameter & 110 mm width
• Material : POM-C
• ASTM Test : Hardness (Rockwell) - R116
• ASTM Test (D256) : Impact Strength (Izod notched) - 6.1kg/cm²
• ASTM Test (D638) : Tensile strength - 685 kg/cm2, Elongation (At yield) - 40%, Tensile modulus - 31900 kg/cm²
• ASTM Test (D648) : Deflection temperature (18.5kg/cm²) - 106 degrees celsius
• ASTM Test (D695) : Compressive strength (10$ deformation) - 885 kg/cm²
• For tilting the envelope up to 90 degrees for directional lighting
• Can fit various pole sizes

Pole/ Base Stand

• Dimension : 65 mm diameter & 1.6 meters height
• Material : Stainless steel for resistance of rust, corrosion & oxidation
  
• Adjustable height of up to 5.9 meters for wider lighting coverage
• Strong & wide expandable base of 1.59 meters for stability

Bag for Stand

• Dimension : 1675mm length X 225mm width & 200mm height
• Material : Italiano leather sling on bag for easy carry
  
• Stand weight with bag is 10 kilogram
  

Container for Lamp

• Dimension : 275mm diameter & 900mm height
  
• Material : Plastic container wrapped with Italiano leather
• Balloon weight with container is 8 kilogram

Container for Ballast

• Dimension : 250mm length X 390mm width X 185mm height
  
• Material : High pressure die cast aluminium housing & chrome steel handle
  
• Ballast weight with container is 17 kilogram
  

Setup

• Quick setup for emergency response (Max. of 3 minutes setup for 1 person)
• Balloon inflates in 45 seconds

Transport

• Easy transport with equipment easily fitted in the car

Lighting Data

• Lighting coverage area at 6 meters height - 4665 square meter
• Lighting area at 4 meter height with minimum 10 lux - 1380 square meter
• Lighting below 6 meter - 550 lux
• Efficiency - 80 lumens per watt
• Maximum lumens - 160000 lumens
• Temperature color - 6000k
• Run-up time - 4 minutes
• Restrike time - 7 minutes
• Ignitor voltage - 4 to 5 kv
• PFC capacitor - 60 uF

Electrical Data (230V)

• Lamp type - Metal halide tubular lamp with E40 cap
• Lamp dimension - 101 mm diameter X 430 mm length
• Lamp power - 2 no's of 1000 watt
• Average Lamp lifespan - 8000 hours
• Lamp maximum temperature - 400 degrees Celsius
• Power supply protection - 10 amp fuse
• IEC standards requirement: -
  IEC 922 & IEC 923 for ballast
  IEC 926 & IEC 927 for ignitors
• Power cable - 3G1.5